FOREST CRANE PALMS 7.94
PALMS 7.94 Forestry Crane: 9.4 m Reach for Heavy-Duty Forestry Work
The PALMS 7.94 is a heavy-duty forestry crane built for daily professional use, and it reaches further than any other crane in the PALMS 7 Series. Its double telescopic boom gives 9.4 m of outreach, so operators cover more ground from one position and spend less time repositioning the tractor or trailer. It suits forestry blocks and commercial operations across New Zealand and Australia.
With 96 kNm of gross lifting torque, 1,750 kg of lift at 4 m and 380° of slewing, the 7.94 has the strength to load chippers and run harvester heads. On a tractor, it mounts through a JAKE mounting system built to that tractor’s serial number, with the frame running through the chassis and around both rear axles to carry the crane’s load. Every JAKE build ALFA has delivered in New Zealand runs a PALMS 7.94.
Pairs with:
- Double telescopic boom with 9.4 m outreach, the longest in the PALMS 7 Series
- 1,750 kg lift at 4 m and - 650 kg at full reach
- 96 kNm gross lifting torque for heavy timber handling
- 380° slewing with 21 kNm slewing torque
- Rated to load chippers and run harvester heads
- Built for daily professional forestry work
- Made in Estonia from Swedish Strenx steel
- Tractor-mounted through a JAKE mounting system built to your tractor’s serial numberSeries 7 - Max outreach: 9.4 m
Lifting capacity at 4 m reach and max pressure, w/o grapple and rotator: 1,750 kg
Lifting capacity at full reach and max pressure, w/o grapple and rotator: 650 kg
Gross lifting torque: 96 kNm
Slewing torque: 21 kNm
Pillar slewing angle: 380°
Rotator maximum load: 60 kN
Max working pressure: 240 bar
Recommended oil flow: 60–120 L/min
Weight: 1,310 kgWhat is the PALMS 7.94 used for?
The PALMS 7.94 is a heavy-duty forestry crane built for daily professional work, including loading chippers and running harvester heads. At 9.4 m, it reaches further than any other crane in the PALMS 7 Series.
How much can the PALMS 7.94 lift?
It lifts 1,750 kg at 4 m and 650 kg at its full 9.4 m reach, at maximum pressure without grapple and rotator. Gross lifting torque is 96 kNm.
Can the PALMS 7.94 be mounted on a tractor?
Yes. It goes on through a JAKE mounting system built in Finland to your tractor’s serial number, and every JAKE build ALFA has delivered in New Zealand runs a PALMS 7.94.
What trailer pairs with the PALMS 7.94?
The PALMS 12U and 15U unibody trailers both take the 7.94, as each is rated for cranes up to 120 kNm of lifting torque. Smaller trailers such as the 10D are rated below the 7.94’s 96 kNm.
